Click on the image to check the artwork
By certification 
OVERVIEW:
12001 |
Splice SS 1/8 × 1/4 |
12011 |
3/16 × 3/8 barb splicer |
12002 |
1/8 × 3/8 Splicer - Reducers |
12012 |
1/4 × 5/16 barb splicer |
12003 |
Splice reducing S/S 4 mm × 6 mm |
11103 |
1/4" × 3/8" BARB HOSE SPLICER |
12004 |
Splicer-Reducers SS 6 mm ×5 mm |
12014 |
1/4" × 7/16" BARB HOSE SPLICER |
12005 |
Splicer - Reducers SS 8mm ×5mm |
11106 |
1/4 ×1/2 Splicer-Reducers |
12006 |
Splice SS 6 mm × 8 mm |
12016 |
5/16 ×3/8 Splicer-Reducers |
12007 |
Splicer-Reducers SS 8 mm × 5mm |
12017 |
1/2 × 5/16 barb splicer |
12008 |
Splice SS 6 mm × 8 mm |
12018 |
SPLICE SS 9MM × 11MM BARB |
12009 |
3/16 × 1/4 barb splicer |
11104 |
SS splicer 3/8 Barb × 1/2 barb |
12010 |
3/16 × 5/16 Splicer-Reducers |
12020 |
SS splicer 7/16 Barb × 1/2 barb |
1.The single barbed tube splicer is made of stainless steel, corrosion resistance, ductility at high temperatures.
2. The barbed hose splicer reducer for connecting a hose to a hose of a different diameter.
3. The splicer fitting connect into piping tube with stepless clamp, the sharp barbed teeth grab the flex line firmly and tight without slipping.
4. The hose ID is smaller than OD of splicer barb, using with clamp related to your hose for a tight sealing around the barb.There are many barbs on the outer wall of these pipe fittings, which can hold the plastic hose well.
5. We have different sizes from very small to big, 1/8 to 1 inch.
6. All beer, CO2 beverage barb hose fittings are passivated or electro-polished to meet the standards of food, beverage and drinking water standard requirements.
7. The wall thickness is thick, it is not easy to deform and crack.
8. Our all reduced splicers have been machined by Fully automatic Longitudinal lathes from Japan. the part feel smoothly with hand, not any flash, burr.
9. NSF, ISO certification, meet Reach-SVHC
10. Application Range: It mainly used in the field of dairy products, wine, in western medicine, tea drinks, soy products, chemical products, Seasoning, cold, biological engineering, water processing engineering, juice drinks, food, high purity gas etc.
Product Description
1.Can we make an small order?
Yes, we can accept a small order.
2.What is the lead time?
As usual, we will complete the delivery within 30 days after your order, or sooner if have inventory.
3.Can I get some samples for testing before placing order?
Yes, we can provide you some free samples for your reference.
4. Can you make other sizes and packages for this product?
Yes, we can make other sizes as your requirement, normally our quotation will contain the common package,
if you need your own packages, you'd better advise your requirement ahead of time for an accurate quote.
http://www.tapfitting.com/
